Published on

The Ultimate Jeep Organization Setup from @DesertDoesIt - MMP, Right Angle Bracket, and Magnets

Introduction

Installing the right accessories in your Jeep can significantly enhance its functionality and organization. In this guide, we’ll walk through the process of installing a Molle panel, right angle bracket, and clockable extension from Desert Does It for your seat jackers.

What's in the Box

First, let’s check out what you will find inside the box. The Molle panel is packaged with the following components:

  • Two mounting bolts
  • A right angle bracket
  • Detailed installation instructions
  • Mounting hardware for the right angle bracket
  • Clockable extension and its mounting hardware
  • Optional: bolt-on magnets for added utility

Once all items have been laid out, we can proceed to install the additional brackets and magnets before mounting the Molle panel in your Jeep.

Installation Process

  1. Attach the Right Angle Bracket
    The right angle bracket needs to be secured to the main Molle panel. Follow the provided instructions to ensure a correct fit.

  2. Mount the Magnets
    Determine the optimal locations for the magnets and attach them accordingly. This will provide you with extra storage and attachment options.

  3. Install in the Jeep
    Now it’s time to get the setup in your Jeep. Begin by aligning the mounting bracket with the threaded hole on the front seat jack closest to the transmission tunnel. Hand-tighten the bolt to start, then tighten it down using your Allen key or bit.

  4. Repeat on the Driver’s Side
    For the driver’s side, align the mounting bracket with its corresponding threaded hole and repeat the fastening process.

  5. Add the Clockable Extension (Optional)
    If you wish to install the clockable extension, line it up and attach one bolt to secure it. This allows you to set the angle you want the extension to be at. Attach another bolt and tighten everything down to 15 ft-lb for a secure fit.

Congratulations! You’ve successfully added a range of functional storage and mounting points to your Jeep.

As always, we appreciate your viewership. Don’t forget to subscribe for more Jeep installations and tips!

Keyword

  • Jeep organization
  • Molle panel
  • Right angle bracket
  • Clockable extension
  • Desert Does It
  • Seat jackers
  • Installation
  • Mounting hardware
  • Magnets
  • Storage solutions

FAQ

Q1: What is a Molle panel and why should I install it in my Jeep?
A: A Molle panel is a versatile storage solution that allows you to attach various bags, tools, and equipment, maximizing the available space in your Jeep.

Q2: What tools do I need for this installation?
A: You will need an Allen key or bit to tighten the screws and possibly a screwdriver, depending on your setup.

Q3: Do I need to use the clockable extension?
A: The clockable extension is optional and is mainly used to adjust the angle of the mounting points to suit your personal preference.

Q4: How secure is this installation?
A: When installed properly, the Molle panel and its accessories should be very secure. Be sure to tighten all bolts to the recommended torque of 15 ft-lb.

Q5: Can I customize the setup with additional accessories?
A: Yes, you can enhance your Molle panel setup with additional accessories and attachment options as long as they are compatible with the panel.

Read More