Rust Bros Shop Chaos! Road Runner Polish Day

Sure! Here’s the detailed markdown article, key extracts, and FAQs based on the provided script:

Rust Bros Shop Chaos! Road Runner Polish Day

Article

This morning at the R Bros workshop, we’re looking at a busy and chaotic day full of reorganizing and polishing tasks. The goal for today is to get Mike's car into the booth for some touch-ups, while I'll be focusing on polishing the Road Runner. Here’s a look at what’s going on:

[Music]

Our shop is packed to the brim, but we need to create space. This involves moving one car into the booth for repainting after taking out the Road Runner, which I’ll be polishing today. There’s a lot of rearranging required to get everything in place.

Despite the clutter, we’ve got a clear plan:

Move the car into the booth.
Get the Road Runner out so it can be polished.

[Music]

Quickly surveying the space, it seems we're dealing with more stuff than you can shake a stick at. Among the clutter, we’ve got two brand new fenders for a 1970 Chevelle with two more on the way for another Chevelle. Thus, we’re juggling work on four cars simultaneously, keeping the shop bustling.

[Music]

The aim is to transfer all this stuff back in, hoping this reorganization will allow us to proceed smoothly.

With the build-up of clear on the Road Runner, there's a worry about breaking through the paint. But we are confident with Blair’s paint job.

[Music]

My task for the day is polishing the Road Runner. It’s already been mostly wet sanded. I’ll be using 3,000 and 5,000 grit on the orbital sander to ensure a clean, polished finish to Blair's paintwork. I haven't received the parts yet for my tooling, which adds a bit to the day’s excitement.

[Music]

The environment requires careful attention to avoid dust contamination. I keep everything clean and use a brand new microfiber cloth, ensuring to remove tags that could scratch the clear coat. Soap in the water aids lubrication, breaking surface tension, and making the sanding process smoother.

[Music]

It's essential to constantly check for any dirt in the sandpaper to avoid scratches. Using the orbital, it senses easier to manage without dust interference. Once everything is polished, I move to the next phase—polishing the trunk.

[Music]

With the car all prepped and cleaned, I begin polishing. I’m starting with a new polishing system, so it feels a bit like a trial run. To date, the progress is solid and the tenacity of this new technique provides a nice bright finish.

On today’s agenda, I am tasked with completing the wet sanding and polishing of the Road Runner. I only have the polishing of the back quarters and trunk lid left. With the initial stage involving 3,000 and 5,000 grits complete, I proceed with a second stage polish.

[Music]

I use a medium pad for the second polish stage. The new polishing compound continues to impress, leaving the finish glossy and neat.

[Music]

After the secondary polish, the final touches involve a glazing polish, leaving the Road Runner sparkling and ready to go.

[Music]

I’m proud of the outcome—it’s polished to perfection, a sight for sore eyes, reflecting the hard work put into every detail.

Keywords

R Bros
Car reorganization
Polishing
Road Runner
Wet sanding
Orbital sander
Clear coat
Surface tension
New polishing system
Med-to-high grit sands

FAQ

Q: What was the main task for the day at R Bros? A: The main task was to reorganize the shop to get Mike's car into the booth for touch-ups and to polish the Road Runner.

Q: What steps were involved in the reorganization? A: It involved moving one car into the booth for repainting and taking the Road Runner out for polishing.

Q: What precaution was taken with the microfiber cloths? A: The tags were removed from the microfiber cloths to prevent scratches on the clear coat.

Q: Why was soap added to the water during sanding? A: Soap was added to break surface tension, making the sanding process smoother and preventing the sanding block from sticking.

Q: What kind of sander was used? A: An orbital sander was used for wet sanding the Road Runner.

Q: What was unique about the second stage polish? A: A medium pad and new type of polishing compound were used, resulting in a glossy finish.

Q: What final touches were applied after polishing? A: The final touches involved using a glazing polish to give the Road Runner a perfect finish.

This detailed markdown article, keywords extraction, and frequently asked questions provide a comprehensive overview of the video’s content, making it easier for readers to grasp the day's work at R Bros workshop.