Published on

JCID True Tone Repair Adaptor Smart Control Version | Avoid Damaging Screen When Writing True Tone

Introduction

Mobile phone repair technicians have long faced the challenge of screen damage, particularly when attempting to write True Tone settings for iPhone devices. This weakness in the repair industry has led to the introduction of the JCID True Tone Repair Adaptor Smart Control Version, aimed at resolving these issues comprehensively.

Introduction to the JCID True Tone Repair Adaptor

The JCID True Tone Repair Adaptor is a groundbreaking solution debuting in the mobile repair industry, designed specifically for the iPhone 13 to 15 Pro series. This new technology boasts a zero R failure rate and promises a 100% success rate in repairing screens without causing additional damage. The adaptor ensures a full return of the original screen’s features, addressing the common problems associated with writing failures during screen repairs.

Comprehensive Compatibility

One of the standout features of the JCID True Tone Repair Adaptor is its extensive compatibility. It supports not only the original screens but also high refresh rate screens from third-party brands. This level of compatibility makes it an indispensable tool for repair technicians aiming to deliver quality results.

Advanced Technology Integration

The JCID system incorporates multi-channel voltage detection chipsets and high-speed signal detection algorithms. This integration guarantees that every screen retains its original features, allowing for optimal performance and brightness post-repair.

Operating the JCID True Tone Repair Adaptor

Using the JCID True Tone Repair Adaptor is straightforward. Here’s a step-by-step guide:

  1. Set a Reference: Begin by taking 40 PM as a reference point.
  2. Select the Correct Screen: Choose the original screen with True Tone for writing.
  3. Connecting the Adaptors:
    • Attach the back of the True Tone Repair Adaptor Smart Control version on the device.
    • Connect the original screen to the appropriate socket.
  4. Data Processing: Click on “Save” to store the original screen data. After successfully reading the data, connect the LG screen (or the new screen requiring the True Tone write).
  5. Select Screen Type: Confirm the screen type as LG.
  6. Verification and Writing: Allow the system to verify the data, then complete the writing process. After installation in the mobile phone, verify that True Tone has been successfully restored.

Following this procedure will ensure that technicians can perform repairs with confidence, knowing they have minimized the risks associated with screen damage.

Conclusion

The JCID True Tone Repair Adaptor Smart Control Version stands as a revolutionary tool for mobile phone repair technicians, providing a solution to the longstanding issue of screen damage while writing True Tone features. With its impeccable compatibility and advanced technology, the adaptor helps ensure that every repair maintains the original quality of the mobile device's screen.

Keyword

  • JCID
  • True Tone Repair Adaptor
  • Smart Control Version
  • Screen Damage
  • iPhone 13 to 15 Pro
  • Zero R Failure Rate
  • Compatibility
  • Voltage Detection
  • Signal Detection Algorithm
  • Mobile Repair Industry

FAQ

Q1: What is the JCID True Tone Repair Adaptor?
A1: The JCID True Tone Repair Adaptor is a specialized tool designed for mobile phone repair technicians to write True Tone settings for iPhone screens without causing damage.

Q2: Which iPhone models are compatible with the JCID adaptor?
A2: The adaptor is compatible with the iPhone 13, 14, and 15 Pro series.

Q3: What is the success rate of the JCID True Tone Repair Adaptor?
A3: The adaptor boasts a 100% success rate with zero R failures during the screen writing process.

Q4: Can the adaptor work with third-party screens?
A4: Yes, the JCID True Tone Repair Adaptor supports high refresh screens from third-party brands in addition to original screens.

Q5: How do technicians use the JCID True Tone Repair Adaptor?
A5: The usage involves connecting the adaptor to both the original and new screens, saving data, and following a straightforward process to ensure the True Tone feature is properly restored.

Read More